Able to install conduit level, straight, according to code or better depending on application.
Able to troubleshoot and repair 120 vac to 480 vac control power.
Able to troubleshoot and repair low voltage AC and DC.
Troubleshoot power supplies of all types.
Etc low voltage, multi voltage, and constant voltage.
ine center control / electrical systems.
Allen Bradley PLC program schools.
Know how to use timers, counters, basic ladder logic, and force functions.
Know how to troubleshoot PLC program logic.
Troubleshoot PLC and its components, replace processors and modules.
Basic understanding of AC frequency drives and soft starters.
Understand plant optimizer systems; how to restart systems and calibrate scanner systems.
Understand plant production and downtime reports.
Know how to reset and restart computer system.
Understand HMI systems.
Know how to reset and restart computer system.
Understand plant PanelView and MessageView systems.
Understand Plant PLC network.
PLC programming / Frequency drive classes once per year.
Level Three Essential Functions*
These duties are designated as ADA Essential Functions and must be performed in this job.
Essential Functions: In addition to all elements of level 1 and level 2
Complete understanding of machine center control / electrical systems.
Understand plant optimizer systems on how to change configuration files and how to back up systems.
Understand plant production and downtime report system.
Know how to change and add information to the report system.
Know how to back up the systems.
Understand HMI systems.
Know how to change and add/remove information to the system.
Know how to back up the systems.
Understand PanelView and MessageView systems.
Know how to change and add/remove information to the system.
Know how to back up the systems.
Understand the Plant PLC network and how to change it.
Layout and complete moderately complex projects to include:
Conduit layout
Wire sizing
Control wiring
MCC & motor sizing
Level Four/Lead Electrician Essential Functions*
These duties are designated as ADA Essential Functions and must be performed in this job.
Essential Functions: In addition to all elements of level 1, level 2 and level 3.
Must have current State of Oregon Journeyman Electrician Supervisor card.
Monitor and report electrical maintenance performance to Electrical Department Supervisor.
Work with the controls technician in scheduling all electrical personnel on projects or mill modifications to reduce cost of outside contractors and improve the knowledge of mill electricians.
Identify areas representing production bottlenecks and lost recovery opportunities.
Develop action plans to provide solutions.
Note: All level changes are to be evaluated by the plant Controls Tech / Electrical
Supervisor.
Some additional requirements may be necessary.
Such as demonstration of specific skills deemed necessary for evaluation.
Non-Essential Functions
Thes
Make prints of installations complete
Troubleshoot 3-phase power, MCC’s, motors, relay logic and aux contacts.
Level Two Essential Functions*
These duties are designated as ADA Essential Functions and must be performed in this job.
In addition to all elements of level 1, the following are required:
Good understanding of mache duties are secondary in nature and are not classified as ADA essential.
Other duties as assigned.
Equal Opportunity Employer.
All qualified applicants will receive consideration for employment without regard to race/ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, or any other status protected by law.
XJ6
Whatsapp
